In this article we are going to discuss in detail about the runtime error R6025. The error is caused because a program that you have been working on has shut down/ended suddenly. You will see an error report on the screen and will be asked to go with troubleshooting options to solve it.

In case you see the pop up displaying the message “Runtime error R6025 pure virtual function call“, chances are that the program which is currently in use has corrupted files or there is a need to reinstall the same.

This runtime error R6025 pure virtual function call is caused when the program calls upon an action which is otherwise not valid. The compiler is responsible for reporting the error when the program is being built.

Another reason behind the r6025 – pure virtual function call error is dependent on the way the coding for the program has been written; often the real problem is at the time of running the program and not writing it.

The possible reasons behind runtime error pure virtual function call are likely to be as stated above. Now, let us move on to seeing and figuring out ways as to how can the r6025 error be fixed.

How to fix Runtime Error R6025 Pure Virtual Function Call

1. As discussed above, the program calls an action which is invalid and therefore the program is faulty. So, the first step in getting rid of the r6025 pure virtual function call fix error is to close that particular program. You can do that with “CTRL +ALT+DEL”.

2. Here, you will have to go to processes and click on the “Image name”. Check the program which needs to be closed and click on “End Process”.

3. Now, go to the start button. (you can close the task manager as its work here is done) Go to control panel over here and select “Uninstalling a program” from the program selection. The program which had been causing the runtime error pure virtual function call has to be uninstalled.

4. Now you have to go to start and type clean “cleanmgr” in the search box and simply click on enter.

5. Now you have to select the drive where you installed the program recently. Now here tick mark all the options and then click on OK followed by deleting the files.

6. Having complied with the above procedure simply restart your system.

7. All you have to do now is to reinstall the program and open it again to check if or not the r6025 – pure virtual function call is still there.

In case the pure virtual function call error is still there, you can download turbo for your PC, install the software and scan your device

By now, hopefully your runtime error r6025 pure virtual function call should be gone as everything has been scanned and hopefully the r6025 runtime error shall no longer bug you. The runtime error r6025 shall no longer cause you any problem!

The Netflix error codes interfere with the streaming of videos due to the internet connection. In this article, I will tell you about the ways you can get away with the Netflix nw-2-5 error and also how can you sort it for once and all. There are multiple reasons behind the nw-2-5 error and there are an equal number of options to do away with it.

How to fix Netflix Error nw-2-5?

The Netflix code nw-2-5 error occurs in an attempt to try and stream Netflix; in such a case you are supposed to give a quick check to the internet connection. This error occurs because of some issue with the Internet connection and therefore the first thing you must be concerned about is whether or not it is working fine. Therefore, if there is a problem with Netflix while streaming and the nw-2-5 error occurs as the server cannot be connected.

So, if you are on a look out for ways to deal with the nw 2-5 Netflix error, here are some of the possible methods you can try:

1. Cross check with the network person in order to be sure of the fact that Netflix hasn’t been blocked purposely.
   
2. By chance if you are on your cellular data or satellite internet, go for an alternative option since they are slower than DSL or cable internet.
   
3. You can always test internet connection on the device you are using as there are many options such as Internet connection/test speed on devices.
   
4. Restarting the device is without doubt one thing you must do in case you have not done it yet.
   
5. Restart the home networks as well. Unplug the router as well as the modem, let it be for 20-30 seconds and then restart it.
   

If even after all of this, the Error nw-2-5 hasn’t been fixed, you should try and bypass the router. Basically, if you use a wireless router which is connected to the modem, try and establish a connection directly with the modem. You will need an Ethernet cable; now if you are able to use Netflix, the nw 2 5 error Netflix has been fixed. To be sure if or not the nw25 Netflix error has been solved, here is what you can do:

1. Begin with turning off the device you are on currently.
   
2. Plug the device to the modem directly. (via the Ethernet cable)
   
3. Unplug the modem and plug it back after 30 seconds.
   
4. Simply turn on the device and see if you can now successfully connect to Netflix.
   

If at all you find that the problem is with the router and that is the reason behind nw 2 5 error Netflix, you have the two options as stated above also. You can bypass the router or contact the concerned person to make the necessary changes in the configurations for the router as well as the DNS. Having done that you will be good to go and the Netflix code nw-2-5 will be gone!

Runtime error ‘1004 is commonly found while using Excel. Excel as we all know is a pretty much our one stop destination when we want to work with tables and have our data in an organized manner. Anyone can use it and when using the application, one might have to deal with run-time error ‘1004 in VBA.(Visual Basic for Application). There are innumerable shortcuts and macros one can use while working with Excel and just like other applications, one might be facing quite a multiple amount of problems and errors.

Reasons for runtime error ‘1004:

There is always more than one reason for any error that occurs on your system. Here, let us see the reasons for error 1004

• Often, when you paste filtered data on a workbook in MS Excel, you might have to deal with the error 1004.
  
• A large collection of strings has been set for a range value.
  
• Application or object defined error
  
• When there are issues in operation of other applications while using VBA Excel file
  
• The desktop icon for MS Excel is corrupted.
  

How Can you fix visual basic runtime error 1004?

You can always avoid the run time error 1004 excel by simply not using it or you could choose to work with new pages rather that copying on the same. Yet another way to get rid of the excel runtime error 1004 is by using template bypass. It might sound to be a complicated process, but in real it has some very basic steps and here they are:

1. First of all, you need to visit Excel and then create a template bypass.
   
2. In the new document, close all the sheets and delete them all, except for one. (the ones which opened automatically must be deleted)
   
3. To delete the additional worksheets, simply right click on them and click delete.
   
4. With each click, you’ll be deleting the worksheets one by one automatically.
   
5. Now when you have followed the above steps, make sure you leave out one page. This will let you do the modifications on the page. Insert the charts, tables, etc.
   

Now this single page shall serve as you template and you can keep copying and pasting things as and when you please. Save the worksheet as template and you can proceed with the rest of your work.

Warnings and Risks

While you work with the applications, in case you do not know entirely about the, you will end up causing harm to your system. So before you experiment with the files and documents, make sure you don’t put your important files at stake. So therefore, to be able to deal better with the visual basic runtime error 1004 while working with important excel files, it is advisable that you take professional help and not end up crashing down your system.

That was all about the excel run time error 1004 and you can easily deal with it by following the above steps!

The problems and bug in Windows Store are many and the advent of Windows 8 has only added up to the errors that now come. Since we all know that there are definite solutions to deal with each of the errors, here I will tell you about how to fix error code: -5006 : 0x80070005.

The error code 0x80070005 is also known as the ACCESS DENIED error. As far as the windows update is concerned, there is nothing wrong with it if this code 0x80070005 error occurs on your screen. The problem that isn’t with the updates available for your PC, the real problem is with the wrong permissions for those folders where the apps are actually stored. You will realize that the regular trouble shooting options will have no effect on this error 0x80070005.

Further in this article you can see a step by step procedure for fixing the windows update error 80070005. If you follow these, you will be good to go in fixing the error.

The windows update error 80070005 that you find is, as follows:

Here is how you need to deal with the Error code 0x80070005

1. To begin with, Press Windows Key + R together. A dialogue box will then appear, what you have to do is enter the following (copy, paste from here) and then hit enter.

C:\Users\<username>\AppData\Local

Note: The username is supposed to be your account name along with the root drive for your system.

2. Now, you have to look up for the packages folder within your local folder. Once you locate it, right click on it and then go to properties.

3. You now have to give total permission to everyone followed by a click on the option advanced controls.

4. Next window is to give full control to each and every user. However, in case there is any username which doesn’t has full control, you can add that particular username with the ‘Add’ option.

5. The next window that appears, here you are supposed to select the principal and then the user/group box (as the case may be) followed by checking whether or not they have full controls for the basic permissions.

With an OK, you can proceed to the final proceedings for giving full control as far as the permission is concerned. Then, all you will have to do is reboot you device and hopefully the windows update error 80070005 will now be gone and shall be fixed.

I hope this helped and the error code 0x80070005 shall no more appear on your windows screen! In case you still did not find the problem going and the fix working for you, you should run a quick check on the permissions again as there has to be something still wrong with them! On your second check, you will realize if at all there is still a wrongly given permission, you can correct it!

And the error code: -5004 : 0x80070005 shall be gone once and for all!

Your computer is attached with many hardware and software support. They are to be fixed from time to time, otherwise error message will start continuing in that. CMOS Checksum error is one such error that you will be finding in your PC. Once you know the reason of the error, you can easily sort out the problem for yourself.

What is CMOS Checksum Error -Defaults Loaded

Before going into any more deep. There is need to understand the symptom of the error message, at the beginning. You will get an error message at the start up, just like that shown in the below image.

You will get two option for yourself, on the start-up screen. It will show you like:

Pressing F1 will resume the service, and you will continue with the configured setup. While you press F2, your system will start, taking the default CMOS settings. If you press F2, the existing CMOS, setting, which can be faulty, will be replaced by the initial values.

Fix CMOS Checksum Error – Defaults Loaded

There are basically two solutions, here. the first one is the re installation of BIOS set up. It is better to go for this one, since it has no cost and you can do it, by yourself.

Resetting Bios

There are certain steps to do that on your own. Initially turn off your PC and open up the cabinet. Locate your motherboard and search for any one among CLR BIOS or CLR CMOS. It can be written there as Clear BIOS or Clear CMOS too. You will get a jumper attached there with 2-pin plug. The process is simple, after you find the jumper. Just open it once and fix it again after 10 seconds. Turn on your system and your BIOS set up is reset totally.

If your problem is not resolved with it, then there is additional need of hardware configuration and you will have to call a hardware expert for the purpose. Your CMOS battery has to be changed. Here is the complete procedure of the battery changing. If you are aware about the hardware settings, you can easily fix it with the following steps.

Change the CMOS battery

CMOS is the place which store data, after your system is shut down. You can easily change the battery, if you know your motherboard well. The battery is a tiny on your motherboard. Generally, the battery model used is CR2032, where CR refers to Lithium battery, 20 is the diameter of the battery in millimetre and 32 is the thickness, when multiplied by a decimal. Do not touch the mother board, unless the static charge stops flowing. Check it by touching a metal part in the system. Once it gives no shock, locate the battery, as shown below.

While removing the battery, make sure that you have not touched other parts of your motherboard. It is the most sensitive part and is having many connections. Since you are not a professional, you will not be able to understand, whether any alteration has been there in the system or not. Just like you opened up the battery, follow the same style and get the new battery attached. Your system will run smoothly.

Page fault in Non-paged area is a type of error, which is very much common and almost all the windows user found this fault, at least once. Your machine will be restarted several times, while you get this error message and you will face a situation, where you cannot do anything. You will be restarting the machine several times in the safe mode, but the message will again pop up and your machine will be shut down, after a few minute. To solve an error, the first thing that is to be done is to know what exactly is the cause of the fault. Then only you can rectify the error. This error message is not something that is to be fixed by the professionals. You can fix it by yourself.

Why “page fault in nonpaged area” ?

The error is shown basically due to the reason of a windows fault. Faulty software, missing string or a fault in NTFS are the basic reasons of this error. Windows fails to search something in its memory, which it needs to run a program. This is the basic reason of the error message and you can solve it by using the below mentioned process.

How to Fix page fault in nonpaged area Error

If the problem is a hardware solution, then there is a different method of resolving that. If it is due to a set up issue, you can fix it in this style. Get to the Start off and open control panel. After the panel is opened, go to the System option. You can also get the option from My Computers, after choosing property from there.

After choosing system, get to the advanced system setting. You will get it at the left side in the fourth position.

Go to the performance tab and select setting from there. Under system properties, you will get the settings, after you click on advanced key. This is the virtual memory setting, where you will have to fix the error actually, in case the error is there in the system configuration.

Beside the visual effects tab, you will get the advanced tab. Select the change key from there and you will be directed towards the virtual memory directly. You will find there a dialog box called Automatically manage paging file size for all drives. Uncheck that first and select no paging file.

Click on set and continuously click on Ok to get out of the dialog box. Do not cut down the tool, since that will cancel the selection totally.

After you complete the process, you will again have to follow the same procedure, but this time you will have to select System nagged size and check in Automatically manage paging file size for all drives. This has to be done, after you restart you PC, after the previous operation is done.

The previous operation is a support that will fix the errors in the virtual memory. If there is any issue in the hardware, you will have to call a professional for the purpose. If that is not the case, the problem must have been already fixed with the above steps.

It’s really annoying and frustrating when you are accessing the site, doing your important work on the internet and suddenly you face an Error “err_connection_refused” in your web browser. So, we are again helping you to how to solve err_connection_refused. After using a lot of methods we came with some of the best solutions for you. This is a network related error which occurs when your computer properly not connected with the internet or blocking the website. Actually, we didn’t find any particular solution for this error but there is some troubleshooting which you can. So we have prepared the list of top working solutions so if one method didn’t work then you can try another method. But  first, let’s take a look at the reason behind this error why it occur.

How to Solve Err_Connection_Refused Problem

Why Err Connection Refused Occurs ?

Here is some major reason for this error, the actual reason could be any of them or sometimes error from the server of the site.

• Network Connection has been blocked by a Security Program or an Adware.
• Firewall might be blocking Google Chrome.
• Corrupt installation Of Chrome
• Malware or virus infection.
• Registry Error or Bad entries in Registry

How to fix Err_Connection_Refused Error

• Clearing Chrome Cache and History
• Reset Proxy Settings
• Allow Chrome in Firewall
• Disable Your Antivirus
• Flushing DNS cache and Resetting IP address
• Clear Chrome History and Cache

Clearing Chrome Cache and History

This error could be because of the saved cache memory in your web browser. Now, what is cache memory whenever we visit a particular website its files like images, CSS, JavaScript and some other files saved into browser database. Now we visit it again that website it should load faster. Time to time we have to clear browser cache and history that might be helping to fix your problem. Now how to delete browser cache memory, follow given below steps:

• Open chrome browser and press ctrl + H.
• This will open a new tab; now click on clear browsing data.
• From the drop down menu select the beginning of the time and tick everything as shown below.
• Now click on clear browsing data and that’s it.

Reset Your Proxy Settings in Chrome

Sometimes we use the proxy for accessing a particular website and after using proxy we forgot to change it back. That proxy might be the problem for this error. Changing it back will help us to solve that error.

• Launch Chrome browser and click on the menu button.
  
• Click on settings and then a new settings tab will open.

• Scroll down to the bottom and select Show advanced settings.
• Now scroll down a bit until you find the Network section, Now under network section click on change proxy settings.
• Now a new window will pop up, and at the bottom, there is an option “LAN settings” click on it.

• Simply un-tick Use a proxy server for your LAN

• Note – If it’s already unchecked then move to the next method.
• Now restart your computer and you’re done.

Allowing Chrome in Firewall

Windows firewall also doesn’t allow some sites to access it’s a default setting in it. So your Firewall block browser to access them. By allowing your firewall and changing some setting in your browser will help you to solve that error. To do so you have to follow some steps as given below:

• So click start, search for Firewall and open it.
• On the left-hand side select “Allow an app or feature through Windows Firewall”.
• Now click on Change settings button and search for google chrome in the list.
• After you find google chrome tick all the options.
• Click on Ok and that’s it.
• Restart your browser and see your site.

Disabling Your Antivirus

Antivirus also blocks some of the site for example Avast, Norton like high-quality antivirus block some sites. First, they check these site and if something they found irrelevant to your search result they block them. If you disable them for some time you can access that site, so disable your antivirus and then try to access the site again. Now how to disable your antivirus, it depends on upon which antivirus you are using you can check on the internet and disable that. But still there is a general way which will help you to disable the antivirus.

• Click on the show hide icons button on your taskbar and right click on your antivirus icon.
• Now you have to select Turn off Real-time Protection option. The option name may vary for different antivirus. In the given image Norton antivirus option you will see.
• Now try accessing the website which was showing Err_Connection_Refused error.

Flushing the DNS cache

Flushing DNS used to solve many network errors. This is also one the most common method to solve the errors like Error 651, dns_probe_finished_bad_config. You can also try this method in case none of the above methods won’t work.  All you have to follow the give instruction give below:

• Click on the start and search for cmd.
• Open cmd and type the following command and hit enter:

ipconfig /flushdns

• This will flush the DNS cache, So if there would be any problem in your DNS cache then it would be resolved.
• Now we need to renew our IP address, So just follow the below instructions :
• Now we need to release our IP address, So type the following command to release your IP address :

ipconfig /release

• Now for renew your IP enter the following command :

ipconfig /renew

• Restart your computer and try accessing the site which showing the error.

There is another method I have read on a forum by clearing your Registry files. A guy told that method and it is working for that, you can also try this.

Cleaning Your Registry

I was looking for more solution for this error and found on that on a forum that. A guy told that after cleaning his registry files he is able to access the sites. Well, this might be a possible solution for this error. Now how to clean the registry setting, for that you have to download the software and download link is given below:

Download and install CCleaner for this link – Download CCleaner

• After the installation is completed launch CCleaner, it looks something like this :

• Click on the Registry tab and then click on the scan for issues.
• Now the tool will start scanning for registry issues After it’s completed click onFix selected issues.

• Take the backup of your registry before cleaning it, select Fix all selected issues.
• Restart your PC and you’re done.

So, guys, these are the best troubleshooting you can do to solve err_connection_refused. If you have any other solution for this error then please share with us through the comment section.

There are multiple issues that your Windows PC goes through, apart from the networking problems; there are various problems to deal with machine configurations as well. In case the registries in the network aren’t totally true you might not be able to connect to web.

In this article I will tell you about the following errors:

• One or more network protocols are missing on this computer
  
• Windows sockets registry entries required for network connectivity are missing
  

FIX: One Or More Network Protocols Are Missing On This Computer

FIX 1 – Use command prompt to Reset Winsock

This is indeed one of the most basic and simple way to solve the problem- reset Winsock with the use of command prompts. Go to administrative command prompt and over there type the following and press enter:

netsh winsock reset

Having done that and after the above command has been run successfully, the system will ask you to reboot the PC in order to finish with the reset. Thus, go ahead and restart the machine and check for problems (if any). If you further find no issues with the restarting, your problem has been solved. If the opposite happens, you will have to reset the socket registry manually. You must be wondering why, it is because if the TCP/IP settings have been affected, a manual reset is required.

FIX 2 – Delete Winsock Registry And Reinstall TCP/IP

1. Press Window + R and enter regedit into the dialogue box that opens up and click on OK to run it.

2. From the left pane, look up for the following keys:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WinSock2

3. Here, clock on WinSock2, and from the drop down menu choose Export. Make sure before proceeding you have a backup of registry entry. Again, with a right click on the drop down menu, click on delete.

4. Now perform the above step with  WinSock(HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Winsock) registry key also. Next, close the Registry Editor.

5. Visit the Control Panel and go to Network and Internet followed by Network Connections. Now, over here, select Local Area Connection (or Ethernet connection)with a right click and choose properties.

6. From the selection you made, click on install.

7. From the next menu, choose Protocol under Select Network Feature Type with a click on add.

8. Next, you have to click on Have Disk in the Select Network Protocol window that appears.

9. Here, choose the system root drive for your PC for installing the file.

10. Now you need to choose Protocol (TCP/IP) – Tunnels. Simply click on OK ad close the network sharing centre; restart your PC.

Now, the entire configuration for PC has been recreated, this in turn helps you in getting rid with the entire problem. So no more errors! Once you restart the PC and proceed with the connecting to the web, you will face no problem.

So finally, no more reboots and regedits! Hope this proved to be of help though!

Did you find issues related to runtime while dealing with the PC at your place? The write-up is about the runtime errors and how to fix such issues. They are the issues that evolved due to installation problems. Apart from these problems there is little more notable stuff that creates such issues. Nevertheless you surely want to get rid of this right? Runtime error 217 is one such irritating error message, that you often get. Here are the basic reasons, for which you get such message.

Reasons to get message of Runtime error 217

• During installation of a program, DLL registration errors are often found. The runtime error 217 is often found due to failure of DLL registration.
• If you are having a related program, then a collision between them at the booting session is quite possible. The error is shown at that time too.
• If some of the windows registry files are missing, the message pops up in your screen.
• Chances of showing the message is more, if your PC is infected with virus or malware.
• If the installation is incomplete, chances to find the message is more.

How to Fix Runtime Error 217!!

How to resolve the issue in windows 7?

The error message of 217 is seen more often at the time of start-up. For windows 7 and windows 8 or 10, the method of resolving the issue is different. Here is the method of resolving the issue in Windows 7.

• Go to the search box, after clicking on the start icon, at the screen’s right corner. Type there – msconfig.exe and put enter. You might need to give the administrator password there to proceed.
• Click selective start-up option from general tab and from the list uncheck the option – Load start-up.
• After that, get to the service tab and you will find a checkbox to hide all Microsoft services. Check out that and disable the button stating all. Once you do this, at the time of start-up, only the Microsoft items will be invoked and all other performance will be disabled.
• After you have completed the level, press OK and restart the system, the problem is resolved.

Resolve the issue for Windows 8 and 10

The above method is to resolve the issue for windows 7. For windows 8 and 10, the process is different. Here are the steps that you need to follow. It will resolve the issue easily.

• You will have to write msconfig initially in the search box.
• Get to the service tab from the opened window and check the box saying hide all Microsoft service. Click on Disable all button at the end.
• Next go to the Start-up and click the link below to open the task manager.
• You will have to select the items singly and disable them manually. After you finish the task, you will have to restart your PC. The problem is resolved.

There are some of the issues related to the antivirus or other programs, for which the error is found. Majority of the errors are found, when two similar programs, doing the same task is installed in your PC. In such cases, the DLL registration fails to be registered, since the other software is already occupying the slot, as a result of which the runtime error is found. Follow the above methods and your problem is resolved.